Centimetre-level RTK for your machines
Corrections for excavators, dozers, graders and tractors. Reliable coverage, simple per-rover pricing, and it works with the gear you already own.
A$990 per rover per year. Hundreds of base stations across Australia. 14-day free trial, no card.
Launch offer: 25% off your first 3 months with code LAUNCH at checkout.
Corrections you can set and forget
Nearest base, automatically
Your rover tells us where it is, and we send corrections from the closest base station. Move to another job and it follows you. Prefer one base? Pick it by name.
Works with your gear
Any rover or machine-control system that takes RTCM 3 corrections over NTRIP. We run it on our own Trimble GCS900 and Earthworks machines. See the full list below.
GDA2020 or GDA94
Both datums, side by side. Use the one your designs and your site are set up in, with no conversions to do yourself.
Every base is checked
We compare each base station's broadcast position with the position we accepted for it. If it changes, we take the base out of service until it has been checked again.
Built by a dozer operator who got sick of inconsistent RTK corrections that dropped out.
BaselineRTK started in the cab. We were paying close to two grand a year per machine for corrections that fell over when the job got busy, and getting a dealer on the phone took longer than the job. So we built our own: the nearest base picked automatically, GDA94 or GDA2020 with no conversion to do, and bases that are pulled from service when they drift.
We run it on our own machines every day. If it isn't good enough for our pad, it isn't good enough for yours.
Tested and developed on our own machines every day since 2024, before we launched BaselineRTK in 2026. We're confident you'll get the most consistent results you've ever had.
Corrections, a caster for your base, or a base on your site
Most customers subscribe to our network. If you already own a base, or you work outside our coverage, we can help with that too.
RTK corrections
Base stations across Australia, in GDA2020 and GDA94. Priced per rover, with a 14-day free trial.
See pricing →Private caster
Own a base already? We host the caster and look after the logins, so your rovers connect through us.
About the private caster →Base station rental
Outside our coverage, or want a base on your own site? Rent one from us for a project or longer.
About base rental →The network in numbers
Across Australia
Try it on your own machine
14 days free for one rover, on your gear, on your site. Add a card before day 14 to keep going. If you don't, corrections pause and you're never charged.
Adding a second rover during the trial ends it, and every rover is charged from that day.
No card needed to start.
Works with the gear you already own.
Change or cancel any time.
Talk to a person
Questions about coverage, your gear or your account: get in touch.
Email
Ask us anything. A person answers, usually within one day, 7 days a week.
support@baselinertk.com